FRP cooling water tower should be inspected when working

FRP cooling tower professional manufacturer is a collection of production, processing, research and development and sales as one of the general type of enterprise, in order to help you more comprehensive understanding of our products, special cooling tower products inspection work to explain, you can read the following:

Enter the cool water tower through the inspection door, clean the debris and silt on the bottom basin, and check whether the pipe of the cool water tower is clogged. Wash the cooling film and the soil of the bottom basin with high pressure water, and drain the sewage through the drain.

Check whether the motor wiring of the cooling tower is correct and reliable, and whether the motor junction box is tightly covered to avoid water and gas entering. Check the tightness of the belt in the belt drive of the cooling tower, so that it is between 8 and 15mm. Check whether the fan is rolling smoothly, and whether the space between the tail of each fan blade and the water tower shell is uniform. Check that the float valve assembly is installed. Check that the amount and density of each layer of film is appropriate. Check that all bolts of the cooling tower are tightened.

As a professional industrial cooling tower manufacturer, we have advanced production equipment and strong technical force, the belt of the cooling tower fan is slightly extended at the beginning of work, should be properly adjusted belt tightness, if it is too tight, and cause accidents, will damage the bearing. When the cooling tower is working, the bearing of the cooling tower fan is refueled and the motor is covered. Acknowledge belt tightness at work. Lock the nut, in addition to acknowledging whether there is a bird's nest or foreign body in the tower, and then start the work. After the circulating water in the glass fiber reinforced plastic cooling tower evaporates, the dissolved matter in the water will be left behind, increasing the water concentration, increasing the corrosion of the water after being concentrated, increasing the scale, so that the cooling tower can be low, and the pipe and equipment are damaged.