How is the structure distributed in the design process of FRP storage tank

The structure of the FRP storage tank is generally four layers: the inner layer, the second inner layer, the strengthening layer, and the external layer.

1, the utility of the lining layer: it is generally composed of polyester surface felt, lined with natural resin rich natural resin layer, is impermeable anti-corrosion layer, good air tightness, high roughness.

2, the utility of the second inner layer: (also known as the mid-waist corrosion resistant layer) is generally considered appropriate and the use of natural resin lined with knitted felt to strengthen. In addition to its effect as corrosion resistance, the main thing is to try to take care of the lining layer, to try to take care of or block the lining crack extension.

3, the structure layer: with non-alkali and non-twist glass fiber disturber yarn to infiltrate the structure of natural resin after the ring and staggered phase joint method of disturbance molding. The utility is to bear various stresses and external loads. The wall thickness is confirmed by the person appointed by our company after referring to the technical specifications and engineering drawings provided by you, using the software and numerical library imported from Italy, and according to the preset specifications of fiber disturbance FRP, the circumferential stress, axial stress and Poisson's ratio coefficient of flexion of the product are calculated in a reasonable and scientific way.

Shandong Shengbao Fiberglass Group Co., Ltd. specializes in the production of fiberglass tanks, fiberglass storage tanks, fiberglass chimney, fiberglass desulphurization tower, fiberglass absorption tower, fiberglass gas hood, etc., and undertakes fiberglass anticorrosion and insulation engineering, welcome to inquire.